Monoblock Pumps
Monoblock Pumps
PP Monoblock Pumps manufactured by us are used to relocate or circulate Hydrochloric Acid, HCL Acid and Sulphuric Acid, Chemicals, and Corrosion Liquids. This Polypropylene Monoblock Pumps are totally Non-Matellic Pumps and can be used for Hydrochloric Acid or HCL Acids. The Design of the PP Pump and motor is been Compacted to do minimize space. It gives high head & capacity. Monoblock Pumps are small, economical and easy to operate. Our PP Monoblock Pumps are highly proffered in Petro Chemical & Paint Industries, Metal finishing, and Fertilizer, Chemical Transfer and Water Treatment plants.
These PP Monoblock pumps are excellent in performance and have minimal maintenance and almost no vibrations. This Pumps are Installed effortlessly and are of incredible durability. Our Monoblock pumps are at very affordable rates. PP / SS316 / PVDF series Pumps are specially designed for highly corrosive chemicals. Where Magnetic Drive pumps are not recommended or their cost is higher these Pumps are Used.
The Monoblock series pump design is a single One-piece moulded polypropylene volute casing. The Impeller is of the semi-open type to ensure a smooth running performance against corrosion. The high alumina ceramic sleeve protects the shaft from any corrosion and abrasion. The GFT or Sic Vs Ceramic PTFE below the Mechanical seal prevents leakage from the pumps. The Cast Iron heavy duty oil-lubricated bearing housing provides maximum strength to the pump.
PP Monoblock Pump
Monoblock type PP Pumps or Polypropylene Pumps are small, economical and easy to use and maintain. Ideal for the transfer of corrosive liquids, Hydrochloric Acid, HCL Acid, pharmaceutical products, food and dairy products, chemical transfer and filtration etc. These pumps are specially designed to give high head & capacity. Std. pumps are available with PTFE gland packing and NFLP motor. The flameproof motor can be supplied on request.
We are Prominent PP Monoblock Pumps Manufacturers and Suppliers in India for HCL Acid & Sulphuric Acids . The other Cities in which we supply are Bengaluru, Mysore, Hubli-Dharwar, Mangalore, Belgaum, Gulbarga, Davanagere, Bellary, Bijapur, Shimoga, Tumkur, Raichur, Bidar, Hospet, Hassan, Gadag-Betigeri, Udupi, Robertson Pet, Bhadravati
Monoblock Pumps Manufacturer | Numatic Pumps
PP Monoblock Pumps manufactured by us are used to relocate or circulate Hydrochloric Acid, HCL Acid and Sulphuric Acid, Chemicals, and Corrosion Liquids. This Polypropylene Monoblock Pumps are totally Non-Matellic Pumps and can be used for Hydrochloric Acid or HCL Acids. The Design of the PP Pump and motor is been Compacted to do minimize space. It gives high head & capacity. Monoblock Pumps are small, economical and easy to operate. Our PP Monoblock Pumps are highly proffered in Petro Chemical & Paint Industries, Metal finishing, and Fertilizer, Chemical Transfer and Water Treatment plants.
These PP Monoblock pumps are excellent in performance and have minimal maintenance and almost no vibrations. This Pumps are Installed effortlessly and are of incredible durability. Our Monoblock pumps are at very affordable rates. PP / SS316 / PVDF series Pumps are specially designed for highly corrosive chemicals. Where Magnetic Drive pumps are not recommended or their cost is higher these Pumps are Used.
The Monoblock series pump design is a single One-piece moulded polypropylene volute casing. The Impeller is of the semi-open type to ensure a smooth running performance against corrosion. The high alumina ceramic sleeve protects the shaft from any corrosion and abrasion. The GFT or Sic Vs Ceramic PTFE below the Mechanical seal prevents leakage from the pumps. The Cast Iron heavy duty oil-lubricated bearing housing provides maximum strength to the pump. Monoblock pumps are a type of centrifugal pump that consists of a single block or unit, hence the name “monoblock.” They are designed to pump liquids or fluids in various industrial, agricultural, and domestic applications. In this article, we will discuss monoblock pumps in detail, including their design, working principle, types, applications, advantages, and limitations.
Design of Monoblock Pumps
A typical monoblock pump comprises a motor, pump, and impeller, all housed in a single casing. The motor and pump are connected by a shaft that runs through the casing, and the impeller is attached to the end of the shaft inside the pump casing. The casing is made of cast iron or stainless steel, and the impeller can be made of plastic, brass, or stainless steel. The inlet and outlet ports are usually located on the top of the casing, and the pump is usually mounted on a base plate.
Working Principle of Monoblock Pumps:
The working principle of a monoblock pump is based on the centrifugal force generated by the rotation of the impeller. When the motor is switched on, it rotates the impeller, which in turn creates a centrifugal force that draws the fluid into the pump casing through the inlet port. The fluid then enters the impeller, which spins it outward towards the outer edge of the casing, where it exits through the outlet port. The entire process is continuous, with the impeller drawing fluid in and expelling it out in a steady flow.
Types of Monoblock Pumps
Domestic monoblock pumps: These pumps are designed for domestic or residential applications, such as pumping water from underground tanks, bore wells, or overhead tanks. They are usually small in size and have a low flow rate and head pressure.
Agricultural monoblock pumps: These pumps are designed for agricultural applications, such as irrigation, crop spraying, and water transfer. They are usually medium-sized and have a higher flow rate and head pressure than domestic pumps.
Industrial monoblock pumps: These pumps are designed for industrial applications, such as chemical processing, water treatment, and oil and gas transfer. They are usually large in size and have a high flow rate and head pressure.
Applications of Monoblock Pumps
Domestic water supply: Monoblock pumps are widely used for water supply in domestic and residential applications, such as pumping water from bore wells or overhead tanks to the household.
Agricultural irrigation: Monoblock pumps are commonly used in agriculture for irrigation, watering crops, and transferring water from one place to another.
Industrial chemical processing: Monoblock pumps are used for chemical processing in various industries, such as petrochemicals, pharmaceuticals, and food processing.
Water treatment: Monoblock pumps are used in water treatment plants for the circulation and transfer of water, including sewage and effluent treatment.
Oil and gas transfer: Monoblock pumps are used for the transfer of oil and gas in various industries, including mining, construction, and transportation.
Advantages of Monoblock Pumps
Easy to install: Monoblock pumps are easy to install and require minimal installation time and effort.
Compact design: The compact design of monoblock pumps saves space and allows them to be installed in tight spaces.
Low maintenance: Monoblock pumps have fewer moving parts, which means they require less maintenance and have a longer lifespan.
Energy-efficient: Monoblock pumps have a high level of energy efficiency, which can lead to significant energy savings over time.
Cost-effective: Monoblock pumps are generally less expensive than other types of pumps, making them a cost-effective option for many applications.
Monoblock Pumps? What are they used for?
Monoblock pumps are used to pump liquids or fluids in various industrial, agricultural, and domestic applications. They are commonly used in water supply systems, irrigation, chemical processing, water treatment plants, and oil and gas transfer. Here are some specific applications of monoblock pumps:
Domestic water supply: Monoblock pumps are widely used for water supply in domestic and residential applications, such as pumping water from bore wells or overhead tanks to the household.
Agricultural irrigation: Monoblock pumps are commonly used in agriculture for irrigation, watering crops, and transferring water from one place to another.
Industrial chemical processing: Monoblock pumps are used for chemical processing in various industries, such as petrochemicals, pharmaceuticals, and food processing.
Water treatment: Monoblock pumps are used in water treatment plants for the circulation and transfer of water, including sewage and effluent treatment.
Oil and gas transfer: Monoblock pumps are used for the transfer of oil and gas in various industries, including mining, construction, and transportation.
Firefighting: Monoblock pumps are also used in firefighting systems, where they can be used to supply water to fire hydrants and sprinklers.
Drainage: Monoblock pumps are used for draining water from basements, swimming pools, and other areas where water needs to be removed.
Fountains and waterfalls: Monoblock pumps are used in landscaping and decorative water features, such as fountains and waterfalls. Overall, monoblock pumps are versatile and can be used in many different applications where the transfer or circulation of fluids is required.
Thank you for visiting our website and your interest in our products and services. If you have any further questions or would like more detailed please feel free to contact us.
