PP Vertical Pump PPV-3
● Pump Type – Centrifugal, Vertical, Coupled type, Self Priming Pump,
● Pump Material – Casing, Impeller and Back Plate is Made of PP(Polypropylene) Material.
● Shaft – SS 316
● Pump Leanth – 1000 mm
● Max Head – Upto 15 Mtr.
● Max Flow – 333 Leter per Minute
● Standard Duty – 6 m3/hr @ 12 Meter
● Inlet & Outlet – 40mm x 40mm
● Motor Specification – 3 HP, NFLP, 2800 RPM, 50 Hz, 3Phase, Hindustan Make.
● Fluid Temprature – 70° C (Max)
● Seal Type – Sealless
● Impeller – Open Type
● Special Application – Shaft with Ceramic Sleeve or Titanium Shaft (Optional) Rs.5000/-
Our range of PP Vertical Pumps
Acid Circulating Vertical Chemical Pump
Acid Circulating Vertical Chemical Pumps are intended for the recycling, circulation, treatment, and filtration of corrosive liquids (including those containing particles) that tend to foul and are stored in constant-level tanks.
The Polypropylene Vertical Acid and Chemical Submersible Pump series is built at standard lengths, with no intermediate bearings, guide bushings, or mechanical seals to eliminate any sliding components. This mechanically and hydraulically sophisticated design enables the use of PP vertical pumps in applications where abrasion (due to crystallisation or calcareous deposits) combined with the chemical aggressiveness of the liquid necessitates a more incisive solution than standard vertical pumps.
Customers benefit.
• The lifetime of Numatic vertical acid pumps is more than double that of the preceding equipment at the customer’s location, and they have significantly extended the average time between maintenance.
• The symmetric structure assures a uniform distribution of the flow stream and velocity in the discharge pipe. This avoids local corrosion and allows for simpler monitoring of acid vertical pump conditions. Discharging through a suspension column without a discharge branch prevents differential thermal expansion. There is only one acid/gas interaction in the discharge column rather than four (two on the support column, one on the shaft and one on the discharge pipe) greatly lowers corrosion in acid and chemical vertical pumps.
Hydrochloric acid, sulphuric, and nitric acid are the most significant industrial chemicals. Vertical circulation pumps are used in the contact process to pump very corrosive, high-temperature, and high-concentration acid in drying towers, absorption towers, and heat recovery systems. Vertical pumps are often mounted at the top of a tank to ensure safe operation. In this example, the design included a vertically mounted end suction pump with the volute casing mounted on a suspension column and a separate discharge pipe.
PP and PVDF Vertical Pump is a chemical pump with excellent corrosion resistance. Because acid and chemical vertical pumps frequently handle a variety of solid acid-base liquids such as sodium hydroxide, sulfuric acid, nitric acid, hydrochloric acid, and so on, sulphuric acid pumps can be classified as cast iron vertical pumps, 316 stainless steel vertical pumps, acid and corrosive chemical pumps made of PP, PVDF, PTFE, FRPP, ETFE, and other sulfuric acid pump materials.
